To run this machine on NT 4.0 machines you also need pdh.dll installed. If its missing use the version in the ZIP.
The file ieinfo.dat must also be installed in the same folder as cmdinfo.exe.

Switch %errorlevel% values used. You can only use ONE switch (as only one errorlevel can
be returned)

/b	Actually returns the build number, e.g. 2031
/sp	Returns the Service pack number, e.g. 3 for SP3, 4 for SP4 etc
	0 for unknown
/v	Version
	1=3.1
	2=3.5
	3=3.51
	4=4.0
	5=Windows 2000
	6=Windows XP
	0=Unknown
/r	Role
	1=Workstation
	2=Server
	3=Domain Controller
/t	Type of installation
	1=Windows NT 4.0 Workstation
	2=Windows NT 4.0 Server
	3=Windows NT 4.0 Server Domain Controller
	4=Windows NT 4.0 Terminal Server Edition
	5=Windows NT 4.0 Enterprise Edition
	6=Windows 2000 Professional
	7=Windows 2000 Server
	8=Windows 2000 Advanced Server
	9=Windows 2000 DataCenter
	10=Windows XP Home Edition
	11=Windows XP Professional
	12=Windows 2002 Server
	13=Windows 2002 Advanced Server
	14=Windows 2002 Datacenter
	15=Windows NT 3.51 Workstation
	16=Windows NT 3.51 Server
	17=Windows NT 3.51 Server Domain Controller
	(DC) at the end means its a domain controller
	(TS) at the end means terminal services component is installed
/ed	Length of limited version in days, e.g. 120
/tr	Installation type, full, NFR or trial
	1=Full Version
	2=Not For Resale
	3=Time Limited
	0=Not known
/ac	Activated status
	-1=Activated
	Any positive number means not activated and is the number of days left to activate (even 0)
/dc	If a domain controller
	0=No
	1=Yes
/ts	If has terminal services
	0=No
	1=Yes
/up	Uptime in seconds (this will not work against 3.51 or lower machines). To work locally on NT 4.0 pdh.dll must be installed
/ie	Internet Explorer Version. This only shows the major version, so IE 5.5 would just be 5
/ht:QXXXXXX
	Allows a check if a certain hotfix is installed
	0=Not installed
	1=Installed
/?	Basic help (not much though :-) )

You can just use cmdinfo with no switch for a basic PC summary. The next major version will
support the querying of remote machines.

Note: For the type no difference is used for a domain controller or normal server for Windows 2000. If you need to
know if its a server/domain controller use /r.

Below is a basic batch file to use cmdinfo to test for service pack:

@ECHO OFF

CMDINFO.EXE /sp
IF ERRORLEVEL 5 GOTO SP5
IF ERRORLEVEL 4 GOTO SP4
IF ERRORLEVEL 3 GOTO SP3
IF ERRORLEVEL 2 GOTO SP2
IF ERRORLEVEL 1 GOTO SP1
IF ERRORLEVEL 0 GOTO SP0

:SP5
ECHO Service Pack 5 is installed on this NT computer.
ECHO No further upgrades are necessary.
GOTO END

:SP4
ECHO Service Pack 4 is installed on this NT computer.
ECHO Press any key to install Service Pack 5...
PAUSE > NUL
rem Let's assume drive X: is mapped to a sharepoint...
rem X:\SP5\UPDATE\UPDATE.EXE -u -f -o
GOTO END

rem (etc. ...)

:END
EXIT

*************************************************************************************
Run pdfind and search windows folder for dllcache, right click and choose properties/
security, enable all actions for your user name. DONT RUN XP-ANTISPY UNTIL YOUR DONE,

ZhCD8
*************************************************************************************
WINDOWS XP 2600 Activation Hack (Works on Home, OEM [RTM], and Retail)

-------------------------------------------------------------------------------------
At the end of installation, reboot in safe mode. (AT THE LAST SELF REBOOT)

REMOVE XP CD FROM DRIVE - WILL NOT WORK ON DUAL BOOT WITH ANOTHER XP OS!!!

First un-hide your folders.
Go in windows\system32\dllcache and remove the read only. (leave your folders un-hide)
Then start: 
*************************************************************************************
Run no_wpa.bat in DOS box (start/run/command.com)

At "pause" msg, delete the NOWPA folder in Windows.

Empty recycle bin

Close the DOS box (hit any key and/or type "exit")

Run NOWPA.reg

Reboot

*************************************************************************************

Written by Angel1610 - #winbeta on dalnet
Thanks to Flamingo^xp, sCoTtD for their help.