▄▀▄ ▄▀▄ ▄ ▄▀▄ ▄ ▄▀▄
▄ ▄▀ ▀▄ ▄ ▄▀▄▀ ▀ ▀▄ ▄▀▄ ▄▀▄▀ ▀ ▀▄ ▄▀▄ ▄▀ ▀▄▀▄ ▄
▄▀ ▀ ■ ▄▀ ▀▄▀ ▄■▀▓█▄ ▀ ▀▄▀ ▄█ ▀▄ ▄ ▄▀ ▀ ▀▄▀ ▀▄
█▄ ▀ ▄█▓ ▄███▓ ▄███▌■▀█▄▄ ▀ ▀▄▀▄▀ ▀
░▓██▄ ▐██▓ ▀██▓▌ ▀███▓ ██▓█ ▄█■▀█▓█▄
████▀ ████▒ ▀█▌ ■▄ ▀██▓░ ▐██▀ ▄ █▄ ▄██▓ ▐██▓█
▄ ■▓███ ▄█▓▀■▄ ▀██ █▄ ▀ ▐█▓▄ ▀█▄ ▀ ▄▄█▀ ▓██▄ ▀███▓░ ███▀
▄▓█▌ ▓███ ▓███▄ ▓█▄ █ ▓██▄ ███▓ █▄ ▀▀███▄▄▀▓██▀ ████▀ ████ ▐▓▀ ▄
▓███ ▓███ ▐▓██▀ ▓██▌ ████▀ ██▓▀ ███ ▀██▓█ ▄▄▄ ▄ ■▓███ ████▄■▀ ▄█▌
▀▓██ ░ ▓███ ▐█▀ ▄■▀████ ░░ ▓███ ░▐▓▀ ███▓ ░░ ██▓▀ ███ ▄▓█▌░ ▓███ ░▐██▓ ▄██▓▌
▀▓▌ ▓███ ▀ ▄▓▌ ████ ███▓▄■▀ ███▓ ▐▓▀ ███▓ ▓███ ▓███ ▀█▓ ▀███▓
▀▄■████▀▄███ ░▓███▄ ███▓ ▀■▄ ███▀■▄■▀ ███▓ ▀▓██ ▓███ ▀■▄▓█▀
▓█▀ █▓██▌ ▓██▀ ███▓░ ▐▓▄ ▓▀ ███▓░ ▀▓▌ ▓███
▀ ▀█▓█▄■█▀ ▓███ ██▓▄ ▀████ ▀▄■████▀ sL!
████▀ ███▓ ▀█▓ ▓█▀
i.n.c.o.r.p.o.r.a.t.e.d ▓█▀ ▐█▓▀ ▀ ▀
▄ ▀ ▄ ■▀ ▄ ▄
▄▄▄████▀▀▀ ▄▄▄███▓█▀ ──────────────────── ▀█▓███▄▄▄ ▀▀▀████▄▄▄
▄████▀ ▄▓██▄▄███▀▄██▓▀ ▀▓██▄▀███▄▄██▓▄ ▀████▄
▓████▌ ▄▓▓████▓█▀▄████▀ DarkSide Incorporated ▀████▄▀█▓████▓▓▄ ▐████▓
▓████▌ ▀▓▀ ██▄█████▓▌ ▐▓█████▄██ ▀▓▀ ▐████▓
▓████ ██▓▀▀ ▀███▓▄ Proudly Present ▄▓███▀ ▀▀▓██ ████▓
▀▓█████▄▄███▀ ▄█▄ ▄████▓ ▓████▄ ▄█▄ ▀███▄▄█████▓▀
: ▀▀▀▀▀▀▀ ■▀ ▀████▓▓▀ ────────────────────────── ▀▓▓████▀ ▀■ ▀▀▀▀▀▀▀ :
│ ▀▀ ▀▀ │
│ [ Pilot3D V1.222 ] │
│ │
╔─│─╗ Supplied By....: [ DSi TEAM ] Release Type....: [ Business ] ╔─│─╗
──┼── Cracked By.....: [ DSi TEAM ] Protection......: [ Serial ] ──┼──
╚─│─╝ Packaged By....: [ DSi TEAM ] Release Size....: [ 5 disk(s) ] ╚─│─╝
│ Release Date...: [ 12/03/2005 ] Operating System: [ WinALL ] │
│ │
: ▄▄▄▄▄▄ ────────────────────────────────────────────────────── ▄▄▄▄▄▄ :
▄▓█████▀▀███▄▄ ▄▄███▀▀▀████▓▄
▄▓████ ██▓ Release Notes ▓██ ████▓▄
▓████▌ ▄▓▄ ███ ███ ▄▓▄ ▐████▓
▓████▌ ▀▓▓████▓▀ ▀▓████▓▓▀ ▐████▓
▀████▄ ▀▓██▀▀ ▀▀██▓▀ ▄████▀
▀▀▀████▄▄▄ ▄▄▄████▀▀▀
: ▀ ▀ :
│ │
│ Pilot3D is a low cost, high-performance, relational trimmed NURB │
│ curve and surface 3D modeling program. Just look at this partial │
│ list of program capabilities: │
│ │
│ Full trimmed NURB curve and surface 3D modeling │
│ │
│ Point, line, polyline, NURB curve and NURB surface entities │
│ │
│ Curve entities can include both polyline and curve sections │
│ │
│ Edit points lie ON the curves AND surfaces │
│ │
│ Automatic symmetrical design option │
│ │
│ Full relational editing of connected surfaces or polysurfaces │
│ │
│ Dynamically updated geometry constraints allowed │
│ │
│ Attach points to curves or surfaces │
│ │
│ Merge points together │
│ │
│ Fix points relative to other points │
│ │
│ Attach curves to surfaces │
│ │
│ Bond surfaces edges │
│ │
│ Attach surface edges to middle of other surfaces │
│ │
│ Draw and update ruling lines between curves │
│ │
│ All related geometry dynamically updates and moves during the │
│ editing process │
│ │
│ Constraints or relationships are optional and can be added or │
│ deleted at any time - they are independent of the entities │
│ │
│ New curves or polylines can be attached directly onto a surface in │
│ one step │
│ │
│ Curves on surfaces can be edited and faired like any other curve │
│ │
│ Curves on surfaces can be used for trimming and be dynamically │
│ dragged │
│ │
│ Move, Move%, and Ooch Point commands for detailed shaping and │
│ fairing of Class A surfaces │
│ │
│ Smoothness indicated with dynamic curvature curves on curves, │
│ surface rows or columns, and planar cuts │
│ │
│ Smoothness also indicated with Gaussian and Mean surface shading │
│ │
│ Full DXF and IGES input and output, including IGES types 143 and 144 │
│ │
│ DXF and IGES input options and report │
│ │
│ STL output for trimmed NURB surfaces │
│ │
│ Text file input and output compatible with spreadsheets │
│ │
│ Fast, dynamic display of plane-surface and surface-surface │
│ intersections while editing shapes │
│ │
│ 2D shapes can be easily created and positioned using many methods - │
│ enter sizes or interactively dragged to fit │
│ │
│ Triangles │
│ │
│ Rectangles │
│ │
│ Trapazoids │
│ │
│ Arcs │
│ │
│ Circles │
│ │
│ Ellipses │
│ │
│ Polygons │
│ │
│ NACA airfoils │
│ │
│ UIUC airfoils (from 1500+ airfoil database) │
│ │
│ Full set of curve and polyline tools for detailed shaping │
│ │
│ Insert and delete points on curve/polyline │
│ │
│ Edit using points ON the curve (2 styles) or edit the vertex points │
│ │
│ Curvefit of polylines │
│ │
│ Refit curves - equal spacing, add points, cull points │
│ │
│ Toggle curve or polyline edit points to/from hard, knuckle points │
│ from/to smooth curve points │
│ │
│ Closed, periodic curves allowed │
│ │
│ Join and break curve commands │
│ │
│ 3D bonded solids can be automatically generated and edited │
│ │
│ Triangle solids │
│ │
│ Box solids │
│ │
│ Wedge solids │
│ │
│ Cylinders │
│ │
│ Cones │
│ │
│ Truncated cones │
│ │
│ Spheres │
│ │
│ Ellipsoids │
│ │
│ Solids can have different sizes, positions and orientations at the │
│ ends │
│ │
│ Solids can be truncated, solid, or hollow like a pipe, with a │
│ user-defined thickness │
│ │
│ Cylinders, cones, spheres, and ellipsoids can be full 360 degree │
│ revolution or any user-defined range of angles │
│ │
│ Solids can be fully capped off and bonded to create "watertight", │
│ editable geometry - even partially revolved solids │
│ │
│ Full set of surface tools for detailed shaping │
│ │
│ Create surface by picking 4 corner points │
│ │
│ Add/delete surface rows or columns anywhere │
│ │
│ Split a surface into two surfaces at any internal row or column - │
│ surfaces remain bonded and editable │
│ │
│ Combine two surfaces into one at a bonded edge │
│ │
│ Bond or un-bond common surface edges │
│ │
│ Edit using points ON the surface (2 styles) or edit the vertex │
│ points │
│ │
│ Surface extrusion - straight path or to a point │
│ │
│ Surface sweeping - using one or two paths - the shape curve is │
│ normal to the path curve or normal to surface │
│ │
│ Surface skinning through a group of 2 or more curves │
│ │
│ Extrusion, sweeping, or skinning shape curves can have hard or │
│ knuckle points to create multiple, bonded, editable surfaces - │
│ polyline sections can be curvefit automatically │
│ │
│ Interpolate one NURB surface through a rectangular mesh of points │
│ from DXF or IGES input │
│ │
│ Surface offsetting or shelling, including polysurfaces - creates │
│ bonded NURB surfaces - offset surface edge joints are automatically │
│ clipped or extended │
│ │
│ Refit surfaces - equal space rows/cols, add or cull rows and cols │
│ │
│ Mold row or column shape - force linear, radius arc, NACA airfoil │
│ shape to surface row or column │
│ │
│ Plate development using dynamically calculated "ruling lines" │
│ showing twist with colors - fit with NURB surface │
│ │
│ Check degree of developability with Gaussian curvature color mapping │
│ │
│ Finite element type plate expansion for flattening doubly-curved │
│ surfaces - calculates all internal strains │
│ │
│ Assign weights to points, weight/length to curves and weight/area to │
│ surfaces │
│ │
│ Output entity/part data, weights, moments, and centers to │
│ spreadsheet type text file │
│ │
│ Calculations - distance, angle, length, area, weights, centers │
│ │
│ Assign thickness to each surface for shelling command │
│ │
│ Grouping of entities allowed by pick, zoom, or entity type │
│ │
│ Full undo capability │
│ │
│ Hide and un-hide entity stack │
│ │
│ Move, rotate, scale, and mirror of entities or groups - by dragging │
│ or by entering numbers │
│ │
│ Snap to points, curves, polylines, or surfaces │
│ │
│ Automatic snap to grid or edit points option │
│ │
│ Match points by X,Y,Z, view, or 3D │
│ │
│ Enter points by picking, snapping, or by entering relative or │
│ absolute positions │
│ │
│ Construction plane displayed for editing in 3D view │
│ │
│ Automatic rotating of construction/edit plane in 3D │
│ │
│ Last, but not least, all of this costs ONLY $645 US! │
│ │
│ │
│ │
╔─│─╗ Install Notes ╔─│─╗
──┼── ──┼──
╚─│─╝ ╚─│─╝
│ │
│ install and replace the exe with the one provided. │
│ │
│ ▄ ▄ │
: ▄▄▄███▓█▀ ────────────────────────────────────────────── ▀█▓███▄▄▄ :
▄▄███▀▄██▓▀ ▀▓██▄▀███▄▄
▄██▓█▀▄████▀ News: 19/11/99 ▀████▄▀█▓██▄
▀█▀▀▄█▀███▓▌ ▐▓███▀█▄▀▀█▀
▀ ███▓▄ ▄▓███ ▀
▄█▄ ▄████▓ ▓████▄ ▄█▄
■▀ ▀████▓▓▀ ▀▓▓████▀ ▀■
: ▀▀ ▀▀ :
│ │
│ Many things had happened since the last time we │
│ updated this section of the nfo. We finally reached │
│ the 2000 releases mark at Novemeber 6, 1999! We also │
│ like to welcome T to DSi as our new HQ and the talented │
│ people recently joined our group. │
│ Watch Out, because the DARKSiDE is going to rock your world! │
│ Be part of the Force contact us on EFnet #DSi │
│ or mail us at [email protected] │
│ │
│ │
: ▄▄▄▄▄▄ ────────────────────────────────────────────────────── ▄▄▄▄▄▄ :
▄▓█████▀▀███▄▄ ▄▄███▀▀▀████▓▄
▄▓████ ██▓ Contacting DSi ▓██ ████▓▄
▓████▌ ▄▓▄ ███ ███ ▄▓▄ ▐████▓
▓████▌ ▀▓▓████▓▀ ▀▓████▓▓▀ ▐████▓
▀████▄ ▀▓██▀▀ ▀▀██▓▀ ▄████▀
▀▀▀████▄▄▄ ▄▄▄████▀▀▀
: ▀ ▀ :
│ │
│ If you're interested in one (or more :) │
│ of the following positions, join #dsi on │
│ IRC's EFnet and talk to someone from the │
│ council or send an e-mail to [email protected] │
│ │
│ * Experienced coder (asm/c++/anything else) │
│ * Experienced cracker (ISDN or faster connection preferred) │
│ * MP3/vcd/iso siteop (T1 or faster connection required) │
│ * Shell supplier (legal, preferably .se/.fi/.nl/.cz) │
│ * WEBSITE DESIGNER (willing to register a domain name) │
│ │
│ NOTE: we do not need any couriers or prehunters, so don't bother! │
│ │
│ ▄▄ ▄▄ │
: ▄▄▄▄▄▄▄ ■▄ ▄████▓▓▄ ────────────────────────── ▄▓▓████▄ ▄■ ▄▄▄▄▄▄▄ :
▄▓█████▀▀███▄ ▀█▀ ▀████▓ NFO Courtesy of ▓████▀ ▀█▀ ▄███▀▀█████▓▄
▓████ ██▓ ▄███▓▀ StrikeLight ▀▓███▄ ▓██ ████▓
▓████▌ ▄▓▄ ██ ▄████▓▌ and ▐▓████▄ ██ ▄▓▄ ▐████▓
▓████▌ ▀▓▓████▓█▄▀████▄ Abstract Designs ▄████▀▄█▓████▓▓▀ ▐████▓
▀████▄ ▀▓██▀▀███▄▀██▓▄ NFO (c) 1999 Abstract ▄▓██▀▄███▀▀██▓▀ ▄████▀
▀▀▀████▄▄▄ ▀▀▀███▓█▄ ──────────────────── ▄█▓███▀▀▀ ▄▄▄████▀▀▀
: ▀ ▀ ▀ ▀ :
│ NFO Last updated on: 19/11/99 Last Updated By: Darkshadow │
╚────────────────────────────────────────────────────────────────────────╝