est. New Years Eve 1999
▄▄▄▀ ■▀▀██▄▄▄ ▄▄▀
▒██▓ ░ ▀████▓▓▓▓▄▄▄▄▄▄▄████░ ▄▄▄▓▓▓▄▄▄
▀██▓▓█▄▄▄ ░ ▀█▓▓▓██▓▓████▓███▓ ▐▓▓▓▓▀▀▀██████▄▄
░░▓██▓░███░ ░ ▀█▓▀ ▀▓███▌▓██░░ █▀ ░ █▓▓▐███▓
▓▓▒▒ ▒▓▓█ ░░ ▀▌ ░██▓▌▓███ ▐▌ ░ ▒░ ▐██ ▐▓█▓▓
▀ ▀▀▀▀▀▀▀ ░▄▄▄▄▄▄ ▄ ▄ ░██▌░▓██▌ ▓ ░░ ░ ░▓▓ ▄▓█▓▓▌
░░▒▓█░ ░███▓░ ▄▄▄▄█▀░ █▓▒░ ▒▓█▌ ▓ ░ █▒ ░ ▀▀▀▀▀▀▀▀
▐▓▓▒ ▓▓███ ▐████▀ ▄█▄▄▄ ▀▀█▓█▀ ░ ▄▄▄▄▄▄ ░▓▌
▓▓█▒▐▓▓███ █████▄ ░█▓▓░ ░▓▓█ ▄░░░░░░ ▀▓▓█▌ ▓▓ ░░░░
░░░░░░ ░██▓▐█████░░▐█████▒ ▓██▒ ▓███▌ ▀ ▄▄▀ █▓▓▌▀▀ ░▒▒▒▒▒░░
░░░░░░▒▒▒▒▒▒░ ▓▓█▄█████▌▒ █████▓▌ ▐██▓ ▓▓▓▓█▄▄█▓▓▓▀ ▄▀▀▀ ▌ ▓▓▓▓▓▓▓▓▒▒▒░
▒▒▒▒▒▒▒▓▓▀▀ ▄▄█▓▓█████████████████▄ ▀██▌████▓▓▓▀▀▀ ▄▄▄▄█▓ ▌░▓▓▓▓▓▓▓▓▓▓▓
▓▓▓▓▓▓▓ ▄▄▄▄███▓▓▓▓▒▀▀▀▀▀▀ ▄▄▄▄▄▄▄▄▄▀▀▌ ▄▄▄▄▄▄▄█████████▄▄▄████████▀
▀▀███ ▄ ▀▀▀▀▀ ▄▄▄▄▄█▓▓▓▀ ▄▀▀ TEAM ▌ LiNEZER0 PROUDLY PRESENTS
▄─ ── ───── ────────────────────────────── ▌ ────────────────────────── ── ─▄
| "LZ0 is 100% vagina free and loving it!" |
▄─ ── ───── ─────────────────────────────────────────────────────────── ── ─▄
█▄.╔════════════════════════════════════════════════════════════════════╗.▄█
|█▒║ Engine.Analyzer.Pro.v3.3.A028.Incl.Keygen-Lz0 ║▒█|
█▓╠════════════════════════════════════════════════════════════════════╣▓█
██║ Cracked By : s! Release Date : 30.06.2004 ║██
██║ Packed By : Team Lz0 Num. Disks : xx/08 ║██
███║ Supplied By : Team Lz0 OSYS : Winall ║███
██║ Protection : Serial NFO Time : 16:07:35 ║██
█║ Publisher : NFO Date : 30.06.2004 ║█
█║ Rating : 9/10 [#########-] Release type : ║█
█║ URL : http://www.auto-ware.com/software/eap/eap.htm ║█
╠════════════════════════════════════════════════════════════════════╣
|║ [ ] Keyfile [ ] Patch [X] Cracked .EXE ║|
▄▄║ [ ] Keygen [ ] Loader [ ] Serial ║▄▄
█▀═══════════════════▒════════════════════════════▒═══════════════════▀█
▀▀▀█▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀██▓█ RELEASE INFORMATION! █▓██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█▀▀▀
▀█ █▀
The Engine Analyzer Pro is a comprehensive software package
for the professional engine builder or engineer to simulate
an engine build-up or modification. It let's you try
various combinations of cams, heads, intakes,
superchargers, etc. and see the effect on torque, HP, air
flow, fuel flow, maximum cylinder pressure, volumetric
efficiency, etc.
For example, its detailed calculations allows you to
investigate the effect of:
Spark advance on detonation (knock), cylinder pressure,
exhaust temperature and HP.
Low lift versus high lift valve flow on volumetric
efficiency, torque and HP.
Ring leakage on blow-by and HP.
Cam profile, valve spring forces and valve train weights
on valve toss, pushrod force and performance.
Cam profile and valve flow curve interaction on torque and
HP.
Rod length on piston Gs, piston thrust, piston velocity,
torque and HP.
"Its like having a dynamometer with detailed
instrumentation right in your computer."
You can let the Pro sort through numerous engine designs on
the computer to find the one giving maximum performance.
You won't be wearing out your engine on the dyno, or
wearing out your check book buying parts. Whatever your
application, turbocharged, nitrous oxide injected,
naturally aspirated or restricted, the Pro can save you
time and money finding that extra power. In the process,
you will gain insight into engine theory. You can "see" the
combustion process, watch air flow past the valves or
tuning pressure waves in the runners, power lost to
friction or to the cooling system, etc.
When finished, enter the Pro's results into our Drag Racing
Analyzer (std or Pro version) or Circle Track Analyzer and
see the effect on ET, MPH, top speed, lap times, etc.
Results can be sent automatically to our new Windows
vehicle programs.
Advantages:
Computer simulations will never replace dyno testing,
however they do have advantages:
The computer repeats exactly from test to test, so small
improvements can be found.
The computer is fast, so numerous combinations can be
tried in minutes.
The computer is not limited by current technology. You can
try modifications which your competition has never even
dreamed of.
Try a "fast burn" head which only needs 10° of spark at
8000 RPM.
Try headers or intake manifolds with 100% anti-reversion.
Install a 4 valve head on a 5 HP Briggs & Stratton.
Try an extremely aggressive cam with only 180° duration
and .800" valve lift.
Rev a low friction Chevy (1" diameter rod & crank
journals) to 12000 RPM.
When you find a new design with big gains, you will find or
develop the required technology. Then use your dyno to
verify and fine tune the "computer optimized" designs.
The Pro is a more detailed program than our more std Engine
Analyzer. It requires more inputs and requires about 200
times more calculation time. If you think the Engine
Analyzer is too technical, you do not want the Pro. The
Pro's major advantages include:
Calculation of data every .1 to .4 crank degrees for
improved accuracy predicting the effect of most any engine
modification.
More inputs for trying more detailed engine modifications.
Additional outputs allowing for more detailed analysis.
More plot options.
More Calculation Menus for calculating input specs.
Can use full valve flow curve. (Upcoming V2.1 D reads
cylinder head flow data and head specs from Port Flow
Analyzer v3.0.)
Can use cam profile file for more accurate description of
the cam profile. (Cam file can be in 5 different std
formats, or from data entered by hand and smoothed by our
Cam Analyzer program.)
Two mass model simulation of valve train dynamics (valve
toss or valve train bending.)
Chain calculations for making up to 36 modifications at
once.
10 libraries for storing sets of engine or component
specs.
Output:
Most any output can be graphed or exported as an ASCII
file, including detailed cycle data as listed here:
Cycle Data
Cylinder pressure Cylinder temperature Cylinder
volume
Heat loss to coolant Int & exh actual valve position
Int & exh cam accel.
Int & exh cam velocity Int & exh port velocity. Int &
exh port pressure
Int & exh pushrod force Int & exh theoretical valve
position Int & exh valve flow area
Instantaneous Piston Acceleration Piston Position
Piston thrust on cylinder wall
Instantaneous piston torque Instantaneous piston
velocity
RPM Data
Engine RPM Brk Tq, ft-lbs Brake HP
Exh Pres, PSI IntVac or Boost Vol Eff, %
Actual CFM Fuel Flow, lb/hr Nitrous, lb/hr
Ntrs Fuel, lb/hr BMEP, PSI A/F Mxtr Qlty, %
BSFC, lb/HP-hr Thermal Eff, % IMEP, PSI
Frctn Tq, ft-lbs Frctn HP FMEP, PSI
Mech Eff, % Motoring HP Pumpng Work, HP
Residual Exh, % Shrt Circuit, % Exh Temp, deg F
Mx Cyl Pres, PSI Mx Cyl Tmp, deg F In Port Tmp, deg F
Piston Spd, ft/min Piston Gs @ TDC Coolant HP
Blow By, CFM In Tun Pres, PSI Avg In Vel, ft/sec
Avg Ex Vel, ft/sec Mach # Act In FlowArea,%
Act Ex FlowArea,% Valve Toss Knock Index
Spark Advnc, deg Primary Jet Secondry Jet
Calc Error Compressor Eff, % Cmprssr Pres Ratio
Compressor HP Compressor RPM Roots Vol Eff, %
Turbo Wastegt, % Turbo Surge, %
What You Need:
IBM or 100% compatible with hard drive, 4 meg Ram, and
Windows 3.1 or Windows 95. (Pentium, 8 meg Ram, 500 Meg
hard drive with VGA or better highly recommended.)
█▀═══════════════════▒════════════════════════════▒═══════════════════▀█
▀▀▀█▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀██▓█ INSTALL INFORMATION! █▓██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█▀▀▀
▀█ █▀
Unpack and install .. Use the keygen to do the magic
▄ ▄
▄█ █▄
▄█════════════════════════════════════════════════════════════════════█▄
▐██ LiNEZER0 NEWS ██▌
███════════════════════════════════════════════════════════════════════███
██║ Time is flying, and yet a few months have passed on since I wrote ║██
██║ a few lines here. Time evolves fast these days, and a lot of stuff ║██
██║ have happened the past months, new people have come around, and ║██
██║ Linezer0 is proceeding like never before; so a big thank you goes ║██
██║ out to all those whom have helped us, and are helping us still. ║██
██║ ║██
██║ INTERRESTED IN JOINING? - THESE ARE OUR OPEN POSITIONS NOW! ║██
██║ ║██
██║ * CRACKERS - As long as you atleast got some experience, then we ║██
██║ are fully capable of teaching you more; but we do ║██
██║ require atleast some knowledge. Recently Lz0 have ║██
██║ also started to look into more advanced programs so ║██
██║ Dongle/FlexLM crackers, and people that are familiar ║██
██║ with Music/Cad/Cam related programs should apply. ║██
██║ ║██
██║ * CODERS - You have knowledge regarding protections like ASPACK ║██
██║ ARMADILLO, UPX and so on, and are able to code both ║██
██║ file analyzsers and/or unpackers, or other useful ║██
██║ tools, then we would be more than happy that you ║██
██║ reach us. ║██
██║ ║██
██║ * UNPACKER - You have indepth knowledge about protection schemes ║██
██║ like for instance, ASPACK/ARMADILLO/UPX and so on ║██
██║ and you are able to quickly remove the protections. ║██
██║ ║██
██║ * MISC. - BNC/Shell suppliers (legit ones only) ║██
██║ - Dump suppliers (10mbit or better) ║██
██║ - App. Suppliers (NO Webware, we got that pos. filled) ║██
██║ * iSO applications (2002+), unreleased of course. ║██
██║ * Applications (2002+), unreleased, NO WEBWARE! ║██
██║ ║██
██║ Or if you think you can contribute in any other way, then feel ║██
██║ free to reach us, so that we can discuss it. Lz0 is always open ║██
██║ for new blood in their ranks, and whom knows, maybee it will be ║██
██║ YOU that would be our next member? ║██
██║ ║██
██║ To contact us regarding any positions above; send us a mail at: ║██
███║ [email protected] - and mark the subject as 'Lz0 position' We are ║███
██║ looking forward to be hearing from you. ║██
█║▄ ▄║█
█▀██═════════════════▒═══════════█▓░░▓█═══════════▒═════════════════██▀█
▄ ▄
▄█ █▄
▄█════════════════════════════════════════════════════════════════════█▄
▐██ LiNEZER0 GREETS! ██▌
███════════════════════════════════════════════════════════════════════███
██║ Respect goes out to the groups which together add up to what we ║██
██║ refer to as the 0DAY scene. There are many truly great crackers ║██
██║ and other people located around in the various groups. Keep up the ║██
██║ great work. For those of you whom are not worthy of this respect, ║██
██║ well you know who you are; and it is never too late to change ║██
██║ that. ║██
██║ ║██
██║ OUT GREETINGS GOES OUT TO THE FOLLOWING GROUPS: ║██
██║ ║██
██║ HERiTAGE, RAZOR1911, F4CG, EMPHASiS, ZENiTH, BiN ║██
██║ ENFUSiA, GHOST RiDERS (GRS), LEGENDS NEVER DiE ║██
██║ FLYiNG HORSE CRACKiNG FORCE (FHCF), DiGERATi ║██
██║ DYNAMiTE ║██
██║ ║██
██║ Without your help and support throughout the years, then Lz0 would ║██
███║ never have existed as we do today. Respect is given in regard of ║███
██║ all the help you have given Lz0 the past few years! ║██
█║▄ ▄║█
█▀██═════════════════▒═══════════█▓░░▓█═══════════▒═════════════════██▀█
▄ ▄
▄█ █▄
▄█════════════════════════════════════════════════════════════════════█▄
▐██ LiNEZER0 iNFORMATiON ██▌
███════════════════════════════════════════════════════════════════════███
██║ Established at New Years Eve 1999, Linezer0 have been around for ║██
██║ some time now. A lot have happened the past few years, people have ║██
██║ come and gone, but the spirit of Lz0 remains. Started out doing ║██
██║ mostly Shareware cracking; evolved into doing some more advanced ║██
██║ cracking, and lately started to look into more areas of cracking ║██
██║ and generally the Cad/Cam and Music type of releases. ║██
██║ ║██
██║ Though Linezer0 still keeps on with their original intention, the ║██
███║ Shareware cracking. We value the competition and friendship, and ║███
██║ thus, we like to call ourselves, a big happy family. ║██
█║▄ ▄║█
█▀██═════════════════▒═══════════█▓░░▓█═══════════▒═════════════════██▀█
▄ ▄
▄█ █▄
▄█════════════════════════════════════════════════════════════════════█▄
▐██ LiNEZER0 DiSCLAiMER ██▌
███════════════════════════════════════════════════════════════════════███
██║ Remember to support the authors of the program(s) worth buying. We ║██
██║ do NOT support using our cracks/serials other than to try out the ║██
███║ full versions for evaluation purposes. If you like the program, ║███
██║ then respect the author, and buy it! ║██
█║▄ ▄║█
█▀██═════════════════▒═══════════█▓░░▓█═══════════▒═════════════════██▀█
▄ ▄
▄█ If you want to contact Linezer0 for various █▄
▄█▌ purposes, then feel free to do so using the ▐█▄
▐██ email: [email protected]. Requests for cracks ██▌
███ will be ignored, so do NOT even try! ███
███▓▓▓▄▄▄ ▄▄▄▓▓▓███
▓▓▓█▀▀█▓▓▓███▄▄▄▄▄ ▀▄▄ █▄▄▄░▄▄▀ ▀▄▄ ▄▄▀ ▄▄▄▄▄███▓▓▓█▀▀█▓▓▓
▒▒▒ ▀▀▀▀▀▀▀▀▀▀▀▄▄▄ ██ ▀█ ██ ██▀██ ▄▄▄▀▀▀▀▀▀▀▀▀▀▀ ▒▒▒
░░ ascii by lord ▀ ██ ██ ▐▄ ░░█▌░▐█ ▀ last updated ░░
maxxtro of cro. ██▄▄▀ ██▓▄█▄ ██▄██ on 01.11.2003
▄▀▀ ▄▀▀▀ ▄▀▀ ▀▀▄