░ ░ ░ ▒░ ░░ ░░ ░ ░ ░░ ░▒ ░ ░ ░ ░
░ ░ ░ ░░ ▄ ░ ░▒░░░▒░░░░░░ ░░▒ ░░░ ░░░░▒░░░▒░ ░▄ ▀░░ ░ ░ ░
░ ░░░ ▒░ ░ ▀ ░ ▄ ▒ ▒▓▒▒▒▓▓░▓▒░▒░▒░▒░▒▓░▓▓▒▒▒▓▒ ▒ ▀▓▀ ▄ ▀ ░ ░▒ ░░░
░░░▒░░▒▒▓█▒▓█▄▄▄▄ ▀▒▀ ▓▒▒░▓▒▒▒▓▒░▒▓▒▒▒▓▒░▒▓▒▒▒▓░▒▒▓ ▀▄ ▄▄▄▄█▓▒█▓▒▒░░▒░░░░
░ ▒░░▒▒▒░▒▒▒▒▒██▓▓▓█▄▄▄▄ ░▒▒▓▒▓▓▒▓▓▓▓▓▓▓▒▓▓▒▓▒▒░ ▄▄▄▄█▓▓▓██▒▒▒▒▒░▒▒▒░░▒ ░
░░░▒░▒░▒░▒▒▒▓▓▒▓▓▓▓█▓███▄▄▄ ▀▀▀▀▓▒▓▓█▓▓▒▓▀▀▀▀ ▄▄▄███▓█▓▓▓▓▒▓▓▒▒▒░▒░▒░▒░░░
░░░░ ░▒░░▒▒▒▒▓▒▓▓▓▓▒▓█▓██████████▄▄▄ ▀▀▀ ▄▄▄██████████▓█▓▒▓▓▓▓▒▓▒▒▒▒░░▒░ ░░ ░
░░░░░░▒▒░▒▒▒▓▒▓▓▒▓▓█▒█▓████▓▀▀ ▄▄▄▄▄▄█▄▄▄▄▄▄ ▀▀▓████▓█▒█▓▓▒▓▓▒▓▒▒▒░▒▒░░░░░░░
░ ░ ▒░▒▒░▒▒▒▓▒▓▒▓▓▓█▓█▒████▓ ░▓███████████████▓░ ▓████▒█▓█▓▓▓▒▓▒▓▒▒▒░▒▒░▒ ░░
░░░▒░▒░▒▓▒▒▓▒▒▓▒▓▓▓▓█████ ░███████████████████░ █████▓▓▓▓▒▓▒▒▓▒▒▓▒░▒░▒░░░ ░
░ ▒░░▒░▒▒▒▒▓▒▒▓▓▓▓███▓████ ██▀ ▀▀█████▀▀ ▀██ ████▓███▓▓▓▓▒▒▓▒▒▒▒░▒░░▒ ░
▀▀ ▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▓██▄ ▀█▀ ▄██▓ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀ ▀▀
▄▄▄▄▄ ▄▄▄▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ░████▄ █ ▄████░ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄▄▄▄ ▄▄▄▄▄
░ ░ ░░▒▒▒▒▒▒▓▓▒▓▒▓▓████████▓ ░█████▄▄███▄▄█████░ ▓████████▓▓▒▓▒▓▓▒▒▒▒▒▒░░ ░ ░
░░░▒▒░░▒▓▒▓▒▓▒▓▓▓█▓█▓█████▓ ░███████████████░ ▓█████▓█▓█▓▓▓▒▓▒▓▒▓▒░░▒▒░░░░░
░░▒░░▒░░▒▒▒▒▓▒▓▓▓▓▓█▒████████▓ ░█████████████░ ▓████████▒█▓▓▓▓▓▒▓▒▒▒▒░░▒░░▒░
░░░ ░▒▒▒░▒▒▒▓▓▓▒▓▓▓▓█████████▄ ░▓█████████▓░ ▄█████████▓▓▓▓▒▓▓▓▒▒▒░▒▒▒░ ░░ ░
░ ░▒░░░▒░▒▓▒▒▓▒█▓▓████████▀▀▀▀ ▄▄ ░▀▀███▀▀░ ▄ ▀▀▀▀████████▓▓█▒▓▒▒▓▒░▒░░░▒░
░░▒░▒▒▒▒▒▒▓▒█▓▓█▀▀▀▀ ▄▄▓█▓█▓█▄▄▓▄▄▄▄▄▓▄▄▓████▓▄▄▄ ▀▀▀▀█▓▓█▒▓▒▒▒▒▒▒░▒░ ░
░ ░▒░▒ ▒▒░▓▒▓█▀▀ ░ ▒▒░▓▓▒▓▒█▓▒▓██▓▓█▓▒▓▓▒▓▒▓▓▒ ░ ░ ░ ▀▀█▓▒▓░▒▒ ▒░▒░
░ ░░▒▒ ▀▀ ░▄▄▄▄▄▄ ░░▓▒▒▒▓▒░▒▓▒█▒▓▒░▒▓▒▒▒▓▒▒░ ▄ ▀░░ ▀▀ ▒▒░░ ░ ░
░ ░░ ▄▄▓█▓▀▀░ ▀▀▓█▄ ░ ░▒▒░░░░░ ░░ ░ ▀▓▀ ▄ ▀ ▄ ░░ ░
░ ▄▓▀▀ ▄▄▄▄▄▄█▓██▀▀▀ ▀ ░ ▄ ░ ░ ▄ ▄▄ ░
░▄▄▓███████▀▀▀▀▀ ▄ ▀▀▀▀▀▀▓▓█▓█▓▄▄▄ ▀▀██▄▄▄▄ ▀▀█▄▄
▄█▓▀▀▓███▓▀▀ ▄▄▓ ▄▓▄ ▄██▓ ▓▄▄▄ ▀▀▀▀▓█▓▓▄▄ ▀▀▓█▓▓▄▄░ ░▓█▀
▀ ███▓ ▀ ██▓ ▀ ▄ ███▓ ▓██▓▒ ▄ ▄ ▀▀▀█▓▓ ▄ ▀▀▀█▓▓██▓▀
░ ░▒▒▓▒▓▓▒▓█▓██▌░██▓▒ █ ██▓ ▒▓▄▄ ███▓ ▓███▓ ▄▄ ▓███▓ ▄▄███▓▓▄▄ ▀▀ ▄▄▒▓▓▒▓▒▒░ ░
░░▒░▒▒▒▓▒▓▓▓███▌▒██▓░ ▓ ██▓ ▓██▓ ███▓ ▓███▓ ██ ▓███▓ ▒▓▓██▓▀▀▀▀▀▀▓█▓▓▒▓▒▒▒░▒░░
░ ░░▒▒▓▒▒▓▓██▓██ ▓███▓▄▄ ██▓░ ▀█ ░███▓ ▓███▓ ██ ▓███ ▄▄▄░ ▄▄████▄░ ▓█▓▓▒▒▓▒▒░░ ░
░░░░▒▒▒▓▓▒▓████ ▓██▓ ▄ ▀▀█▓▄▄▄▓███▓ ▓███▓ ██ ▓███▄ ▓█▓░ ▀▀▀▀▓█▓░ ▀▒▓▓▒▒▒░░░░
▄ ███▓ ▀ ▀▀▀▓███▓ ▓███▓ ▄ ▓███▓ ▓█▓░ ▀ ▄ ▓█▓░
▄▄ ░██▓▓ :: F4CG :: ░███▓ ▓███▓░ ▓███▓░ ░█▓▓ ░█▓▓
▄▄█▀▀ ▓██▓░ presents ▓██▓░ ▓██▓▓░ ▓▀▀░▄▄▓▓█ ░▄▄▓▓█
▀█▓░ ▄▓██▓░ ▀▓██▓▄ ▀▀█▓▓█▄▄▄▄██▓▀▀▀▄▄▄██▓▀▀▀
▀▀██▓▓▀ ░▀▀▀▀▀ ▀▀▀▀▀▀░ ▀▀▀▀▀▀░SINCE 1983!!
░ ░▒░▒▒▓▒▓█▓██▐▌ Multisim v8.3.30.SP1 ▌▐██▓█▓▒▓▒▒░▒░ ░
▄▄ ▄ (c) Electronics Workbench ▄ ▄▄
▄█▓░ ░▓█▄
▓█▓ Cracker...: Team F4CG Release date....: 08-11-2005 ▓█▓
▓█▓ Supplier..: Team F4CG OS type.........: WinALL ▓█▓
▓█▓ Packer....: GiftWrap Number of disks.: [xx/05] ▓█▓
▄ ▓ Protection: Activation Program Type....: Application ▓ ▄
▓ ▓░ ░▓ ▓
▓▄▄▄▄▄ ▄▄▄▄▄▓
▄▄▄▄█▓▀▀▀ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ ▀▀▀▓█▄▄▄▄
▓░ ▄▄ ▄▄ ░▓
▄▄▄█▓ ▓█▄▄▄
▓█▓▀ ■ RELEASE SITE: ▀▓█▓
█▓░ ░▓█
█▓ ▓█
█▓ http://www.electronicsworkbench.com ▓█
█▓ ▓█
█▓ ▓█
█▓ ■ RELEASE INFO: ▓█
█▓ ▓█
█▓ Product versions updated: 8.0.24, 8.0.45, 8.0.55, 8.2.12, 8.3.19 ▓█
█▓ ▓█
█▓ Product Improvements ▓█
█▓ ==================== ▓█
█▓ ▓█
█▓ 1. Increased robustness of MultiVHDL 8 Co-simulation ▓█
█▓ ▓█
█▓ 2. Placement of Buses and Bus Connections ▓█
█▓ - Added ability to change the RefDes of a Bus Off-Page Connector ▓█
█▓ - Improved netlist generation of Bus connections via Bus Off-Page ▓█
█▓ connectors ▓█
█▓ ▓█
█▓ 3. Ability to rename a virtual sources (i.e., VCC, VDD) to a ▓█
█▓ user-defined name ▓█
█▓ ▓█
█▓ 4. Performance improvement in the Component Wizard when number of pins ▓█
█▓ >= 900 ▓█
█▓ ▓█
█▓ 5. General Orcad Import Improvements ▓█
█▓ - Net names are properly named when imported into Multisim ▓█
█▓ - Speed improvement ▓█
█▓ ▓█
█▓ 6. Advanced pin mapping capabilities between symbol and footprint ▓█
█▓ ▓█
█▓ Bug Fixes ▓█
█▓ ========= ▓█
█▓ ▓█
█▓ 1. Memory leak on redraw toolbar ▓█
█▓ ▓█
█▓ 2. When turning off the option "autowiring on connection", user can ▓█
█▓ not make connection to bus (no bus entry created) ▓█
█▓ ▓█
█▓ 3. Cannot Stop simulation when Word generator is in "Step" mode ▓█
█▓ ▓█
█▓ 4. Editing a hidden pin name in the component wizard causes the ▓█
█▓ program to crash ▓█
█▓ ▓█
█▓ 5. "Math calc" on Tek Scope in U mode not accurate ▓█
█▓ ▓█
█▓ 6. CPU performance may decrease if using Multisim 8 SP1 along with the ▓█
█▓ following printer drivers: HP1320N, HP inkjet 2200 series, ▓█
█▓ and HP4000 ▓█
█▓ ▓█
█▓ ▓█
█▓ ▓█
█▓ ■ INSTALLATION NOTES: ▓█
█▓ ▓█
█▓ 1. Unzip, unrar and install. ▓█
█▓ 2. Enjoy! (Activation is already removed) ▓█
█▓ ▓█
█▓ ▓█
█▓ NOTE 1: This update is only available for registered users with an ▓█
█▓ active Support & Update subscription ▓█
█▓ ▓█
█▓ NOTE 2: Service Pack 1 provides additional functionality that is ▓█
█▓ exposed via your user configuration file and may cause ▓█
█▓ unexpected context menu behavior. To prevent this, and access ▓█
█▓ the updated toolbars/context menus,delete the "Multisim users" ▓█
█▓ directory in your EWB8 folder and re-launch Multisim. ▓█
█▓ ▓█
█▓ NOTE 3: Electronics.Workbench.Multisim.v8.2.12.SP1.Retail.Cracked-F4CG ▓█
█▓ is NOT v8.3.19.SP1 but it will be updated when UltiBoard is ▓█
█▓ also installed. Just to make it clear ;-) ▓█
█▓ ▓█
█▓ ▓█
█▓ Yet another big thanx to TnM on this one. ▓█
█▓ ▓█
█▓ _\|/_ PROGRAM PROVIDED FOR TEST PURPOSES ONLY! _\|/_ ▓█
█▓ IF YOU LIKE THIS PROGGIE, BUY IT!! ▓█
█▓ ▓█
▓▒ ▌ F4CG - BLESSED BY THE ANCIENTS ▐ ▒▓
▄▄▄▌ ▄▄▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄▄▄ ▐▄▄▄
▀ ▄▄▄█░ ░█▄▄▄ ▀
▓█▓▀▀ ▀▀▓█▓
█▓░ ■ F4CG TEAM INFO/NEWS: ░▓█
█▓ ▓█
█▓ ▓█
█▓ No groupnews available at this time ... ▓█
█▓ ▓█
█▓ ▓█
█▓ ▓█
█▓ ■ F4CG MEMBERS: ▓█
█▓░ ░██
▓█▓▄ Member and site info is protected. ▄▓█▓
▀▀▀█▓ ▓█▀▀▀
▓░ ▀▀ ▀▀ ░▓
▀▀▀▀█▓▄▄▄ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▄▄▄▓█▀▀▀▀
▓▀▀▀▀▀ ▀▀▀▀▀▓
▓ ▓░ ■ F4CG GREETINGS: ░▓ ▓
▀ ▓ ▓ ▀
▓█▓ CRO - maxxtro - DiViNE - ECL - SH0CK - LUCiD - ZENITH - UCF - STC ▓█▓
▓█▓ - All current and past F4CG members wherever you are! - ▓█▓
▓█▓ ▓█▓
▓█▓ ...and all who keep the scene free. Sell warez and die! ▓█▓
▀█▓░ ░▓█▀
▀▀ ▀ ▀ ▀▀
░ ░▒░▒▒▓▒▓█▓██▐ ▌ last updated 05/31/2004 by Maer ▐ ▌██▓█▓▒▓▒▒░▒░ ░
...nfo.done.by.maxxtro.of.cRo...